manualshive.com logo in svg

Kontron CP3003-SA, Руководство пользователя

Поделиться
Скачать
Kontron CP3003-SA Скачать руководство пользователя страница 79

CP3003-SA

Installation

ID 1052-6929, Rev. 3.0

Page 3 - 11

D R A F T   —   F O R   I N T E R N A L   U S E   O N L Y

3.5.1

USB Device Installation

The CP3003-SA supports all USB Plug and Play computer peripherals (e.g. keyboard, mouse,
printer, etc.).

3.5.2

Installation of External SATA Devices

The following information pertains to external SATA devices which may be connected to the
CP3003-SA via normal cabling.

Some symptoms of incorrectly installed SATA devices are:

• Device on a SATA channel does not spin up: check power cables and cabling. May also

result from a bad power supply or SATA device.
The SATA connector on the CP3003-SA provides only a data connection. The power for
this device must be supplied by a separate connector. For further information, refer to
the respective documentation of the device.

• SATA device fail message at boot-up: may be a bad cable or lack of power going to the

drive.

3.5.3

SATA Flash Module Installation

A SATA Flash module may be connected to the 4 HP CP3003-SA via the onboard connector
J12.

This optionally available module must be physically installed on the CP3003-SA prior to
installation of the CP3003-SA in a system.

During installation it is necessary to ensure that the SATA Flash module is properly seated in
the onboard connector J12, i.e. the pins are aligned correctly and not bent, prior to fixing the
SATA Flash module with the respective screw.

 

Note ...

All USB devices may be connected or removed while the host or other
peripherals are powered up.

Note ...

Only qualified SATA Flash modules from Kontron are authorized for use with
the CP3003-SA. Failure to comply with the above will void the warranty and
may result in damage to the board or the system.

Note ...

The SATA Flash module cannot be used in conjunction with the Smart Extension
Module, the CP3003-HDD module, and the CP3003-XMC module. 

Содержание CP3003-SA

















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды