Kontron AL i.MX6 ULL, Руководство пользователя

Страница: 7 / 40

AL i.MX6 ULL – Rev. 1.0
www.kontron-electronics.de
// 7
For Your Safety
Your new Kontron Electronics product was developed and tested carefully to provide all features necessary to ensure its
compliance with electrical safety requirements. It was also designed for a long fault-free life. However, the life expectancy of your
product can be drastically reduced by improper treatment during unpacking and installation. Therefore, in the interest of your
own safety and of the correct operation of your new Kontron Electronics product, you are requested to conform with the
following guidelines.
High Voltage Safety Instructions
As a precaution and in case of danger, the power connector must be easily accessible. The power connector is the product’s ma in
disconnect device.
Warning
All operations on this product must be carried out by sufficiently skilled personnel only.
Electric Shock!
Before installing a non-hot-swappable Kontron Electronics product into a system always ensure that the
power is switched off. This also applies to the installation of piggybacks. Serious electrical shock hazards
can exist during all installation, repair, and maintenance operations on this product. Therefore, always
unplug the power cable and any other cables which provide external voltages before performing any
work on this product.
Earth ground connection to vehicle’s chassis or a central grounding point shall remain connected. The
earth ground cable shall be the last cable to be disconnected or the first cable to be connected when
performing installation or removal procedures on this product.