Kontron AL i.MX6 ULL, Руководство пользователя

Страница: 27 / 40

AL i.MX6 ULL - Rev. 1.0
www.kontron-electronics.de
// 27
3.2.7. USB Debug Connector (X11)
USB Mini-B Connector Pin Signal Name
1 VCC
2 RXD
3 TXD
4 N.C.
5 GND
An additional adapter is needed to translate the UART signals provided on the Mini-B USB connector to USB . This adapter must
be connected between an USB port on your computer and the debug interface on the AL i.MX6 ULL board using a standard USB
cable.
Figure 9: UART-USB Adapter
This adapter is only supplied as standard with our development kits but can also be ordered separately.
For more detailed information please have a look at the online documentation https://docs.kontron-electronics.de.
This documentation includes all information you need to put your device into operation including a quick start guide as well as
further information on how to get access to the Yocto based GitLab software repository and how to make your own software
images.
3.2.8. USB OTG Connector (X7)
Micro-USB Connector Pin Signal Name
1 +USB_VCC
2 D-
3 D+
4 ID
5 GND