6. Product Description
6.12.
M@CII 121 Panelmount Version of the M@CII System
If you mount the M@CII 121 into an instrument panel or other cabinet use the eight threaded studs M4 at the rear side of
the front plate (refer to Fig. 30, pos. 11). Please observe that this unit is designed as the panelmount version of the
M@CII system.
For the M@CII 121 mounting, cut a window and eight pre-drill holes according Fig. 42. The system must be attached
firmly with eight nuts M4. The contact surface with the rubber seal must be clean and flush.
Fig. 42: Hole pattern for the M@CII 121 system
38
M@CII 70/104/121/150 - User’s Manual (V1.00)
