6. Product Description
6.2.2.
Interfaces (Rear, Bottom Side of the System)
M@CII 70/104/121/150 - User’s Manual (V1.00)
21
4
3
5
6
1
2
Fig. 19: Detail with interfaces for M@CII 104/121/150 systems
4
3
5
6
2
1
Fig. 20: Detail with interfaces for M@CII 70 systems
Legend for Fig. 19 and Fig. 20:
1
Optional interfaces (shown as CAN-BUS and
RS422/485 interfaces for M@CII 104/121/150) and
a serial RS232 interface for M@CII 70)
2
DC power connector
3
2x USB (2.0) connector
4
COM1 (RS232) serial port connector
5
2x LAN (1Gbps) connector
6
VGA connector
6.2.2.1.
LAN1 and LAN2 Ethernet Interface Connectors
These interface connectors (pos. 5, Fig. 15, Fig. 16, Fig. 19 and Fig. 20) are provided as RJ45 sockets with integrated
LEDs.
Ethernet Port
Data Transfer Rate
LAN1
10/100 Mbps
LAN2
10/100 Mbps
Ethernet LED States:
Left LED State
Link Activity State
Right LED State
Link Speed
off
Link not active
Off
10 Base-T
green
Link active
yellow
100 Base-T
6.2.2.2.
USB Connectors
The system is equipped at the bottom side (rear) with two USB 2.0 interface connectors (pos. 3, Fig. 15, Fig. 16, Fig. 19
and Fig. 20). These connectors provide connections for USB-compatible devices.
6.2.2.3.
VGA Interface Connector
An external (analog) monitor can be plugged into this interface (pos. 6, Fig. 15, Fig. 16, Fig. 19 and Fig. 20) which is
provided as a 15-pin D-SUB socket.
6.2.2.4.
COM1 Serial Interface Connector
This RS232 connection (marked as COM1) (pos. 4, Fig. 15, Fig. 16, Fig. 19 and Fig. 20) are available as 9-pin D-SUB
connectors (female) and provides connection (RS232) for serial devices.