6. Product Description
6.1.1.
USB Interface Connector on the Font Side of the M@CII 104/121/150 Systems
This connector USB 2.0 allows you to connect different USB-compatible devices to the M@CII 104/121/150 system.
The USB connector is covered by an elastic captive rubber coat. The rubber coat prevents the penetration of fluid, if no
device is connected.
The M@CII 104/121/150 systems only comply with IP65 protection class at the front side, if the front
side USB connector is covered by the elastic captive rubber coat.
The USB interface connector is available only on the front side of the M@CII 104/121/150 system.
The M@CII 70 system is not equipped with the USB interface on the front side.
6.1.2.
Front Plate Versions
All versions are suitable for installation in an instrument panel or other cabinet. At the front side are located:
❏
Front plate (aluminum front plate with polyester front foil) for the M@CII 104/150 systems.
❏
Panelmount front plate (aluminum front plate with polyester front foil (black Pantone 433C) and eight metric threaded
studs at the rear side of the front plate) only for the M@CII 121 systems.
❏
Front plate [zinc coated steel plate painted RAL9011 (black)] on the front side for the M@CII 70 systems.
Depending on the size of the integrated display (7"/10.4"/12.1"/15"), the outline dimensions of display unit are:
(refer also to the chapter 7.3 “Mechanical Specifications”).
Dimension for
M@CII 70
M@CII 104
M@CII 121
M@CII 150
Front Plate (WxH)
235x168 [mm]
9.25 x 6.61 [inch]
348x277 [mm]
13.70x10.90 [inch]
380x312 [mm]
14.96x12.28 [inch]
449.4x354 [mm]
17.69x13.93 [inch]
Frontal cut-out for
display (WxH)
157x95.8 [mm]
6.18x3.77 [inch]
214.2x161.2 [mm]
8.43x6.34 [inch]
248x186.5 [mm]
9.76x7.34 [inch]
306x230 [mm]
12.04x9.05 [inch]
Rear side enclosure
(WxHxD)
215x146.2x45.7 [mm]
8.46x5.75x1.79 [inch]
295x234x44 [mm]
11.61x9.21x1.73 [inch]
324x263x49.5 [mm]
12.7x10.3x1.94
[inch]
406.4x311x50
[mm]
16x12.24x1.96 [inch]
Table 1: Front panel dimension
6.1.3.
Display (7"/10.4"/12.1"/15") with Touch Screen
Depending on the ordered M@CII system the built-in display is a 7"/10.4"/12.1"/15" size TFT display with corresponding
resistive touch screen (glass-glass technology). The touch screen is USB connected.
For technical specification of the built-in display refer to the chapter 7 “Technical Data”.
The display is equipped with a resistive touch screen. The touch screen offers the same degree of user comfort as the
mouse buttons. A stylus is supplied for touch screen operation.
The surface of the display is also mechanically protected through the touch screen. The touch screen (USB connected)
registers contacts of a finger or a pen and allows moving the mouse pointer. Use a stylus (included) for best results. This
functions only under integration of the necessary software.
You get the corresponding touch screen driver for your operating system, installed on your M@CII system.
Do not use a hard or a pointed object (like screw drivers) to operate the touch screen, since it can
damage the touch screen surface.
The front panel (M@CII 104/121/150) and the touch screen are covered by a plastic overlay and care
should be taken when cleaning it (see the chapter 6.1.5 “Touch Screen Care and Cleaning”).
M@CII 70/104/121/150 - User’s Manual (V1.00)
13
