Konsberg AIS 200, Руководство по установке

Страница: 89 / 119

Kongsberg AIS 200 Installation Manual, rev. 2 Appendix B - Digital interface IEC 61162-1
NOTE 1 defined in ITU-R M.1371. The description of
umber. The values are defined in ITU-R
field indicates that this is unchanged.
ore.
OTE 3 Number of persons on-board includes the crew. The value 0 = not available
(default). The value 8191 = 8191 or more people. Only values from 0 to 8191
shall be accepted by the AIS. A null field indicates that this is unchanged.
NOTE 4 The characters that can be used in the destination are listed in the ITU-R M.1371,
table 14 (6-bit ASCII). Some of the acceptable characters in this 6-bit ASCII table
are reserved characters under IEC 61162-1. They must be represented using the
"^-method" (See IEC 61162-1, section 5.1.3.). A null field indicates that the
previously entered destination is unchanged. The string of characters
"@@@@@@@@@@@@@@@@@@@@" are used to indicate that the ship's
destination is not available.
NOTE 5 The UTC time of arrival field follows the "TIME" field type described in table 6
(IEC 61162-1). The two fixed digits of seconds are not broadcast by the AIS and
should be set to "00". The optional decimal point and associated decimal fraction
shall not be provided. The resulting time is a number with six fixed digits,
"hhmm00". Leading zeros are always included for the hours and minutes. If the
hour of arrival is not available, "hh" shall be set to 24. If the minute of arrival is
not available, "mm" shall be set to 60. A null field indicates that this is
unchanged.
NOTE 6 The day and month of arrival are in UTC. The day is a two-digit fixed number
requiring leading zeros. The month is a two-digit fixed number requiring leading
zeros. If the day of arrival is not available, "00" shall be the number for day. If the
month of arrival is not available, "00" shall be the number for the month. A null
field indicates that this is unchanged.
Type of ship and cargo category are
ship and cargo are indicated by a n
M.1371, message 5. A null
NOTE 2 Draught is reported in the range of 0 to 25,5 metres. The value 0 = not available
(default), and the value 25,5 indicates that the draught is 25,5 metres or m
Only values from 0 to 25,5 shall be accepted by the AIS. A null field indicates
that this is unchanged.
N
79