Konsberg AIS 200, Руководство по установке

Страница: 116 / 119

Kongsberg AIS 200 Installation Manual, rev. 2 Appendix F - Inland Waterway installation
14. APPENDI N D WATER X F - I LAN WAY
his appendix describes the Inland Waterway installation and configuration if the Inland
functionality is enabled for the AIS Mobile Unit.
4.1 Setup file
the setup file
values:
eived in VDL message 23 from the AIS Base
Station.
yage ship data are nfigured r the proprietary
e Unit’s presentation or pilot
n.
ay setup parameters are
e (default values a shown):
iguration *****
0=Disabled, 1=Enabled
nland
**** Static data, updated from PI sentence PIWWSSD or MKD *****
IS_IWWSSD_EUR_SHIP_NUMBER 00000000 !European Ship Number
ength of Ship (1/10 meter, 0=Undefined)
AIS_IWWSSD_BEAM_OF_SHIP 0.0 !Beam of ship (1/10 meter, 0=Undefined)
peed, 0=Low, 1=High
IS_IWWSSD_QUAL_OF_COURSE 0 !Quality of Course, 0=Low, 1=High
INSTA LLATION
T
1
The Inland functionality is enabled via the AIS_IWW_ENABLED parameter in
and may have the following
AIS_IWW_ENABLED 1 ! 0=Inland option disabled
1=Inland option enabled
The Inland Waterway "Area" definition is rec
The inland static and vo
co via the MKD o
PIWWSSD and PIWWVSD sentences as input to the AIS Mobil
interface. The format of the sentences is shown in the next sectio
In addition to the Enable parameter, the following Inland Waterw
available in the setup fil
re
!***** Inland Waterway conf
AIS_IWW_ENABLED 0 !Inland option,
AIS_IWW_MODE 0 !Current Mode, 0=Maritime, 1=I
!*
A
AIS_IWWSSD_LENGTH_OF_SHIP 0.0 !L
AIS_IWWSSD_ERI_SHIP_TYPE 8000 !ERI Ship Type (8000=Unknown)
AIS_IWWSSD_QUAL_OF_SPEED 0 !Quality of S
A
AIS_IWWSSD_QUAL_OF_HEADING 0 !Quality of Heading, 0=Low, 1=High