18
TRADITIONELLE DEUTSCHE QUALIT
AT
· ·
MAINTENANCE
In order to prevent unintentional engine start, disconnect the spark plug wire
from the engine during storage and transportation of the device and before all
cleaning and maintenance work (such work is allowed only with the engine
cooled).
The
Könner & Söhnen
cultivators must be operated, stored and maintained in
accordance with the owner’s manual. The manufacturer is not responsible for all
damages and malfunctions of the device caused by non-compliance with the
operating, maintenance and safety instructions for the machine.
THE MANUFACTURER IS NOT RESPONSIBLE FOR:
- The use of non-original lubricants, gasoline and oils;
- The unintended use of the device;
- Losses due to further use of the cultivator with defective parts;
- Technical changes to the device.
MAINTENANCE
All maintenance work listed in section “Maintenance” must be performed
on a regular basis. If it is impossible for the machine operator to carry out
maintenance work, the machine operator should contact the service center and
file an application for maintenance work. The manufacturer is not responsible for
any damage caused by failure to perform maintenance work.
SUCH DAMAGE ALSO INCLUDES:
- Damage and losses resulting from the use of non-original spare parts;
- Corrosive damage and other effects of improper storage of equipment;
- Damage caused by maintenance work carried out by unauthorized personnel
CLEANING THE CULTIVATOR
Thorough cleaning and care of the device increases its service life and protects
it from damage. After each use, clean the cultivator from soil and dust, remove
grass and straw from cutters. Keep the device clean and neat, check for damaged
parts, whether the threaded parts are secure.
Do not use jet water to clean seals, engine components and bearings. Otherwise,
the cultivator may need costly non-warranty repair.
