19
TRADITIONELLE DEUTSCHE QUALIT
AT
· ·
TO ADD OIL, PROCEED AS FOLLOWS:
1. Make sure the device is mounted on a flat, level surface.
2. Unscrew the dipstick cap on the engine.
3. Fill the crankcase with highly refined oil using a funnel.
4. The oil level should be as shown in Fig. 15.
REPLACING OR ADDING ENGINE OIL
Follow the maintenance schedule and check the engine oil level on a regular
basis. When the oil level drops, add fresh oil to ensure proper operation of the
engine. To replace oil, proceed as follows:
1. Ensure that the cultivator is placed on a flat, level surface.
2. Place an oil drain tray under the cultivator engine.
3. Unscrew the drain cap located under the dipstick cap using a 10 mm wrench.
5. Wait for the oil to drain.
6. Replace and tighten the drain cap.
Oil pollutes soil and groundwater.
Avoid oil leaking out of the crankcase. Dump used oil into the
hermetically sealed container. Hand over used oil to waste oil
collection point.
The cultivator is delivered without oil and fuel. Before the first start,
be sure to fill the device with oil and gasoline! Use a funnel
(not included) to fuel the device.
!
!
WARNING - DANGER!
Dipstick cap
Drain cap
Oil level
Oil drain plug
Fig. 15
