Konig SEC-CAM901, Руководство по эксплуатации

Страница: 23 / 31

SPEED DOME CAMERA
Dome address setting
The control commands contain target
dome’s ID. The dome only reacts to the
command sent to its own address or
broadcast address.
Each dome should be assigned an address.
Four kinds of IDs are applicable for domes:
1. Hard ID:
Hard ID is set via DIP SW2 can not be
changed from OSD menu. Hard ID
ranges from 1 to 254.
2. Programmable ID:
Set all 8bits of SW2 to ON to activate soft
address. Input 10-bit camera SN number,
and then set dome ID by controller (The
dome SN number can be found on the
side of the camera or on the package and
user manual.).
3. Broadcast ID:
Broadcast ID is programmable.
When broadcast ID is available, all domes
connected to the control bus will react to
the command. The default broadcast ID
is 255.
SW2 is for dome ID setting. The setting is
strictly according to binary system. If you
are not familiar with binary system
please look up the address setting chart.