Konig SEC-CAM901, Руководство по эксплуатации

Страница: 19 / 31

SPEED DOME CAMERA
<Record> Record pattern
<Test> Test recorded pattern
<Run> Run Pattern until other command
received
<Back> Back to upper level menu
When getting into <Record> following menu pop
up.
User can operate dome doing pan/tilt/zoom as
needed. The system records the operation. To end
recording user can call preset 1 to confirm. The
current pattern recording is finished.
ZONE
<Main Menu> <Auto Running> <Zone>
Zone Number: 001
Title: 000000000000000
Left Limit
Right Limit
Remove Current
Pan Speed
001
Run
Back
A zone is an area between two points. User can set
a zone and scan it automatically.
<Zone> is similar to <Cruise> except user can
assign a title for a ZONE. Whenever the camera
moves into the zone, the title will display on the
screen to alert the operator.
NOTE: Camera scans horizontally only. User can
set up to 8 zones.
<Zone Number.>
Display current zone number. Values are 001~008.
Pan right then tilt up or down to select desired
value.
<Title>
Set the zone title. Select the desired letter or
number. Repeat above procedure to complete the
title editing.
Set the position of the first point. The following
picture shows the setting menu.
Call Preset 1 To
Confirm……..
<Speed> Set the scanning speed
(camera movement speed). Value ranges from 001
to 255, the greater number represents the higher
speed. Pan right to select, tilt up or down to
change value.
RUN To start scanning the current zone
(001~008).
BACK Back to upper menu level.
<Pan Speed>
Setup pan speed
PARK TIME
<Main Menu> <Auto Running>
Preset
Tour
Pattern
Cruise
Zone
Park Time: Off
Park Action: Off
Back
This function let the system automatically run an
assigned function after a specific period of idle
time. For example: the dome is running a tour
and an operator breaks the tour to do other work,
the dome can automatically carry on the tour
within a period of time after the operator stops his
operation.
<Park Time>
Park time means a period of idle time without any
operation.
The values includes: OFF, 001~255.
[Off]: Disable this function.
[001~255]: Auto run a function after the number
seconds of idle time.
<Park Action>
Park action refers to the function that system will
automatically run when park time is up.
The function could be:
Call preset 1 To
Confirm ……..
X/100
Record