Konifera BW28000, Инструкция по установке

Страница: 20 / 23

- 20 -
6
Connection
CAUTION, risk of electric shock. The power connection of the awning shall
be performed by a qualified technician only. To be installed under effective
regulation.
●
Make sure that the power supply corresponds to the appliance's specifications (
Technical
data
). Interrupt power supply. Connect the cables in the terminal as follows.
After finished all the conection of the wires according to the picture, pls
remember to use the insulating tape to pack the wire individually.
Operation instructions
Awning users are not allowed to operate the product more than 2 rounds, in that case,
motor overheat protection status will be automatically started. In that case, pressing on the
remote control cannot run the awning. Users need to wait for about half an hour for any
manipulation.
Pressing “stop” button on remote control when the awning completely opened or closed.
An indicator light is flashing when one of the buttons is pressed. When power off, you can
use hand crank to open or close the awning.
Colour of cable
Yellow/green
Blue
Brown
From To
Awning
Earth
Neutral
Live
Neutre
Phase
Connection at
the motor
Motor
Power source
Up
Stop
Down
P2
Function Press button
Stop
Up
Down
Retract / close the awing
stop opening/closing process
extract / open the awning
Connection
09030-BW28000.indd 20 04.10.18 20:09