Konifera BW28000, Инструкция по установке

Страница: 18 / 23

- 18 -
4
Installation of wall brackets
The holes of each group must be on the same line in transversal direction and vertical
direction.
(Note: the nut and washer might be
separated from the bolt during the
process of transportation, please put
them back into their original positions
before hammer them into the wall during
installation.)
Expansion
bolt
Washer
Nut
Bolt
Mark the height on the wall and locate the drill hole positions for the wall brackets.Drill
the holes with masonry drill of 12mm diameter,The depth of the hole is above 110mm.
Please note that the depth of the holes shall leave the threaded part of the central bolt
extruding from the wall.
Put the expansion bolts through the
wall bracket, then plug the expansion
bolts into the above-mentioned
hole
，
Check and ensure all wall
brackets lies on same horizontal line
before tightening all nuts.
(Wall brackets number please refer to page 2 parts list.) 16 parts list.)
09030-BW28000.indd 18 04.10.18 20:09
Vergewissern Sie sich, dass sich alle W
andsockel auf derselben
horizontalen Linie befinden.
Ceiling
Ceiling