Konica Minolta Vivid 910, Инструкция по эксплуатации

Страница: 56 / 64

54
Error Messages
The following error messages appear if incorrect operation is performed or an abnormality occurs with the
VIVID 910. If an error message appears, take the appropriate corrective actions as shown in the table below.
If the problem still does not disappear, contact a KONICA MINOLTA SENSING-authorized service facility.
Error Message
(Alphabetically)
Meaning Action
AF/AE ERROR
LASER BARRIER
MAY BE CLOSED
PRESS ANY KEY Auto-focus or auto-exposure failed.
Press any key. Remove the laser cap.
In the case of an object for which it is dif-
ficult to acquire correct images, set the
focus lock or manual focus.
AF ERROR
LOW CONTRAST
PRESS ANY KEY Auto-focus failed due to low contrast
of the object. Press any key. In the case of an object for which it is dif-
ficult to acquire correct images, set the
focus lock or manual focus.
BACKUP ERROR
PRESS ANY KEY Failed to back up the data.
Press any key. All the settings will be initialized, so set
them again.
CAUTION
LASER SCANNER IS
OUT OF ORDER
PLEASE TURN OFF The laser beam is not emitted prop-
erly. Turn off the power immediately. Highly dangerous! Turn off the power
immediately and contact a KONICA
MINOLTA SENSING-authorized service
facility.
CHANGE LENS
TELE S/N ********
M ID D L E S /N ********
WIDE S/N ********
PRESS ANY KEY The lens is now being replaced.
Press any key. Attach the lens hood properly.
Check the serial No. of the lens, and
replace the lens properly.
CLOCK ERROR
PRESS ANY KEY The clock is abnormal.
Press any key. The date/time data will be initialized, so
set it again.
DIRECTORY FULL
PLEASE INSERT
ANOTHER MEMORY CARD
OR
PRESS ANY KEY The maximum allowed number of
files has already been stored. Replace
the compact flash card with a new
one, or press any key. Insert a memory card that has sufficient
unoccupied memory capacity.
Delete files from the currently inserted
memory card.
ERROR
OUT OF DISTANCE RANGE
PRESS ANY KEY The object is not located within the
specified object distance range. Press
any key. Place the object in a position 0.5 m to 2.5
m away from the VIVID 910.
INVALID FORMAT
PLEASE INSERT
ANOTHER MEMORY CARD
OR
PRESS ANY KEY The memory card has not been ini-
tialized.
Press any key. Insert an initialized memory card into the
slot or initialize the current memory card.
(It is not possible to initialize a memory
card using the VIVID 910.)
LIGHT IMPROPER Insufficient amount of light Illuminate the object brighter and scan it.
NO FREE SPACE
PLEASE INSERT
ANOTHER MEMORY CARD
OR
PRESS ANY KEY There is insufficient unoccupied
capacity on the memory card.
Press any key. Insert a memory card that has sufficient
unoccupied memory capacity.
Delete files from the currently inserted
memory card.
NO MEMORY CARD
PLEASE INSERT
A CARD
OR
PRESS ANY KEY No memory card is inserted.
Insert another memory card or press
any key. Insert a memory card into the slot.
Vivid910-hard-E.book Page 54 Thursday, September 25, 2003 6:49 PM