Konica Minolta Vivid 910, Инструкция по эксплуатации

Страница: 30 / 64

28
Replacing the Lens
3 Hold the external edge of the fixing ring and
pull it out.
M
emo
Hold the ring with your finger located near the red mark on
the lens. This will facilitate pulling the lens.
N
ote
Attach the lens cap to the removed lens, place it in the lens
case and keep it in a safe place.
The following information will appear in the viewfind-
er as shown on the right. Check the serial number of
each lens displayed.
4
Attach the desired lens.
• Remove the lens cap.
• Align the red mark on the lens with the one on the
lens mount socket, and insert the lens until a click is
heard.
M
emo
• The position of the red mark on the lens varies with the fo-
cus point.
• Hold the ring with your finger located near the red mark
on the lens. This will facilitate inserting the lens.
5
Turn the lens fixing ring clockwise to secure
the lens.
Vivid910-hard-E.book Page 28 Thursday, September 25, 2003 6:49 PM