Konica Minolta Vivid 910, Инструкция по эксплуатации

Страница: 38 / 64

36
Scanning the Object
Setting Manual Focus
With certain objects, “AF/AE ERROR” will be displayed at the end of a scan, indicating that auto-focus cannot
be performed.
In this case, press any key to clear the error view, then set manual focus as described below.
M
emo
Auto focus may not be possible with the following objects:
• White wall etc. whose contrast is low
• Objects with repetitive patterns (stripes etc.)
To scan such objects, set focus lock or perform manual focus.
For a description of focus lock, refer to page 35.
[Operating Procedure]
1
Measure the distance to the object with a mea-
suring tape.
M
emo
Although the front of the lens is the reference position, this
position varies with the type of lens, so measure the distance
from the front of the VIVID 910.
2 Press .
Manual focus mode will be active.
M
emo
To cancel manual focus, press again.
3
Press and set the scan distance.
Pressing F will move the focus position far away from you.
Pressing N will move the focus position toward you.
4
When the scan distance is set, start scanning.
R
ef.
Vivid910-hard-E.book Page 36 Thursday, September 25, 2003 6:49 PM