Konica Minolta IP-601, Инструкция по эксплуатации, Страница: 47 / 131

Print Controller INSTRUCTION MANUAL 3-21
Chapter 3 Printer Driver Functions
Features - Combination
The settings you can select are as follows:
[None], [Booklet], [2-in-1] or [2-in-1 Repeat]
Default is [None].
[Booklet] prints paper so that booklets are made when it is folded into two.
1 2 7 8
7
A4/B5/A5 A3/B4/A4 A3/B4/A4
1
2
8
5
3
4
6
[2-in-1] setting is available which prints out two page data on one sheet of paper.
Two page data is printed out on a sheet of paper twice as large as the selected
size of paper.
1 2 1 2
e.g., 2 pages of A4-size paper
Prints 2 pages onto a A3-size paper
2-in-1
1 1 1 2
e.g., 2 pages of A4-size paper
Prints a page twice onto a A3-size paper
2 2
2-in-1
Repeat
[Combination] can not be selected in the following cases:
•
When [Collate] is not selected in [Copies]
•
When [8.5” x 14”], [11” x 17”], [A3], [A6], [B4], [B6], [F4], [8K], [11” x 17” W],
[A3W], or [B4W] is selected in [Paper size]
•
When [OHP-Interleaved (Blank)] or [OHP-Interleaved (Print)] is selected in [Media
Type]
•
When settings other than [None] are selected in [Duplex]
[Booklet] can not be performed in the following cases:
•
When settings other than [None] are selected in [Features] - [Staple]
•
When [Back Cover] and/or [Sheet Insertion] are/is selected in [Cover] tab
•
When [OHP (Transparency)], [OHP-Interleaved (Blank)], [OHP-Interleaved
(Print)] or [Tab sheet] is selected in [Media Type]
•
When [On] is selected in [Features]-[Offset]
[2-in-1] or [2-in-1 Repeat] can not be performed in the following cases:
•
When [Back Cover], [Front Cover] and/or [Sheet Insertion] are/is selected in
[Cover] tab