manualshive.com logo in svg

Konica Minolta IP-601, Инструкция по эксплуатации, Страница: 113 / 131

Поделиться
Скачать
Konica Minolta IP-601 Скачать руководство пользователя страница 113

6-2  Print Controller INSTRUCTION MANUAL

Chapter 6 Printer EKC

■

Overview of the Printer EKC

Printer EKC is a feature use to manage the number of prints on the copier.

Setting the Printer EKC feature means that, provided you enter a password
previously established on the printer to request a print job, the copier counts up
printouts based on the EKC counter to know when a preset limit is hit, and also
rejects a print request from a client having no valid password.

●

Setting of Printer EKC

A password for Printer EKC and its counter are set in the copier’s key operator
settings. For guidance in setting Printer EKC, refer to the copier INSTRUCTION
MANUAL.

A password for Printer EKC has need to be the same as User ID to enter
at printing out time.

●

Printing with Printer EKC

If Printer EKC has been set as appropriate, perform the following steps to get an
output.

1.

Select the [Paper] tab in the printer driver properties window, and click the
[Settings] key.

[Password Print Settings] dialog will appear.

2.

Type in the user ID set up in Printer EKC into the User ID text box.

You must enter the same password (5 digits or less) in the User ID text
box that you set up on the copier for Printer EKC.

If you do not enter the correct password or if you leave the User ID text
box blank, the print job is not performed and is registered as
Unsuccessful jobs. When in doubt about the password for Printer EKC,
ask your system administrator.

3. Click [OK] to close the Properties and start the printing process.

Содержание IP-601




































































































































Отзывы:

Нет отзывов