Konica Minolta IP-601, Инструкция по эксплуатации, Страница: 100 / 131

5-8 Print Controller INSTRUCTION MANUAL
Chapter 5 Scanner Operation
[SCAN DENSITY]
Press this key to select a read density. The default is the same as that in the copy
mode.
When the original document is being read, you can change the density, but you
cannot select [AUTO] in the process.
[LENS MODE]
Press this key to change the magnification ratio at which the original document is
read.
You can select [ZOOM], [RE] or [1:1]. [RE] is the same as the default in the copy
mode.
[ZOOM] range in each resolution are as follows:
200 dpi: 0.66 - 4.00
300 dpi: 0.44 - 4.00
400 dpi: 0.33 - 4.00
600 dpi: 0.33 - 2.00
[SCAN SIZE]
Press this key to select the scanning paper size.
Available only when using the Platen mode. You can select [AUTO] or [SIZE
SETTING].
[AUTO]: Same as the default in the copy mode
[SIZE SETTING]: Allows you to select a scanning frame size.
Example: When an A3 original is loaded and you select A4, then
the scanning takes on the A4 frame.
Options: 5.5”x8.5”, 5.5”x8.5”R, 8.5”x11”, 8.5”x11”R, 8.5”x14”,
11”x17”, A3, A4R, A4, A5R, A5, A6R, B4, B5R, B5, B6R,
F4, Full AREA
Default is [AUTO].