Konica Minolta IC-203, Руководство пользователя

Страница: 420 / 432

Utility Tool 15
IC-203 15-41
Setting Up a SCO UNIX Remote Printer to Use lpd
Use the following procedure to set up a remote printer on the host that sends
jobs to the network interface card using lpd.
1
At the prompt, enter the mkdev rlp command.
– You cannot run mkdev rlp twice. If you have additional printers to
be configured, use the rlpconf command.
2
You are now asked a series of questions. Respond as follows (shown
in bold type):
– Please enter a printer name: lprprinter1
– Is lprprinter1 a remote printer or a local printer?
R
– Enter remote host name: lprprinter
– Confirm the information you entered:
Y
– Confirm the preceding connection as your system
– default: Y
– Enter another printer name or quit setup: Q
3
If necessary, stop and restart your remote daemon.
4
Using a line editor of your choice, edit the /etc/printcap file and change
the:
rp=entry to PRINT.