background image

E-1

FK-514 

Fax Kit

INSTALLATION MANUAL

A883-9552-00

Applied Machines: C658/C558/C458/C368/C308/C258

COLOR MFP: 65 ppm/55 ppm/45 ppm/36 ppm/30 ppm/25 ppm

Product Code: A79J/A79K/A79M/A7PU/A7PY/A7R0

1. Accessory parts

*1

This part is used only when installing this option 
to models C658/C558/C458.

*2

When installing a Line 1, use the two gaskets.
When installing a Line 2, use three of the four 
gaskets supplied with the Fax Kits for the Line 1 
and Line 2.

*3

Depending on the applicable marketing area, the 
modular cable may have a ferrite core.

*4

Not included depending on the applicable mar-
keting area.

Note:

    • This manual provides the illustrations of the 

accessory parts and machine that may be 
slightly different in shape from yours. In that 
case, instead of the illustrations, use the 
appearance of your machine to follow the 
installation procedure. This does not cause any 
significant change or problem with the proce-
dure.

    • If none of the later steps instruct you to use the 

parts including screw and cover that you 
removed following the instructions described in 
this manual, discard them.

2. Installation procedures

No.

Name

Shape

Q’ty

1. Fax kit

1

2. Gasket 

*1*2

2

3. Modular cable 

*3

1

4. Ferrite core

 *4

1

5. Modular cover

1

6. Label (Super 

G3 label) 

*4

1

7. Label

 *4

1 set

8. Installation 

manual 

1 set

<Installations to models C658/C558/C458>
Follow the installation procedures starting on page 
E-2.

<Installations to models C368/C308/C258>
Follow the installation procedures starting on page 
E-9.

Keep this bag away from babies and 
children. Do not use in cribs, beds, 
carriages, or playpens.

The thin film may cling to nose and 
mouth and prevent breathing. This bag is 
not a toy.

Содержание FK-514

















Отзывы: