49
Manual exposure
To set other functions with the controller, press the up
key; the aperture value turns gray.
Press the down key to select between two apertures;
the apertures vary depending on the zoom position.
When the shutter-release button is pressed partway
down, the shutter speed used for the exposure is dis-
played.
Exposure display
When the exposure display in the top right corner of the monitor is
gray, the controller can be used to change the flash mode (p. 28),
macro mode (p. 30), and white balance (p. 46).
To change the exposure, press the up key of the con-
troller; the exposure display turns white.
Press the down key to select between two apertures;
the apertures vary depending on the zoom position.
Use the left/right keys of the controller to set the shutter
speed.
When the shutter-release button is pressed partway
down, the difference between the metered exposure
and the set exposure is displayed in Ev (p. 82). When
the difference is greater than ±2.0Ev, the display turns
red.
To set other functions with the controller, press the up
key; the exposure display turns gray.
Exposure difference
