Konica Minolta DF-612, Руководство по обслуживанию

Страница: 43 / 52

5. Service Mode Field Service Ver. 1.0 Jun. 2008
DF-612/SP-503/MS-501
Adjustment / Setting
5.2.5 Paper Passage
Functions • To check for paper passage through the ADF in each of the ADF modes.
Use
• Used for checking the document path for any abnormal condition when a document
misfeed occurs.
Setting/
procedure
1. Call the Service Mode to the screen.
2. Touch [Scan Area].
3. Touch [ADF Adjustment].
4. Touch [Paper Passage].
5. Select a paper passage mode to be tested from [1-Sided No Detect], [1-Sided Mixed
Org.] or [2-Sided].
6. Set the original in the feed tray.
7. The Start key color changes from orange to blue.
8. Press the Start key. The operation starts.
NOTE
• After starting the operation by pressing the Start key, if the Start key is pressed
during the operation, the operation will be suspended. Then, if the Start key is
pressed again during the suspension, the operation will be resumed.
• If the Stop key is pressed during the test operation, the test will be forced to end.
• If there is no original set in the feed tray, the Start key will not work.
• All originals set in the feed tray are passed through. Upon the completion of all
originals passed through, the paper through test ends.
38 Service Manual Y109 850 - 7