Konica Minolta bizhub C258, Быстрый старт

Страница: 62 / 266

bizhub C368/C308/C258 2-27
2.6 Touch Panel 2
Ab
ou
t T
h
is
M
ach
in
e
Chapt
e
r 2
Pinch in/Pinch out
Place two fingers on the screen and then open or close them. Used
to enlarge or reduce a preview image.
Rotation
Place two fingers on the screen and then rotate them. Used to rotate
a preview image.
Precautions on using the Touch Panel
This machine features a capacitance-base touch panel. Note the following points when operating the Touch
Panel .
-
Use your finger or the Stylus Pen supplied with this machine. Note that the Touch Panel will not re-
spond appropriately if you operate it using your nail or a pen tip instead of your finger or the Stylus Pen .
-
Applying a strong force to the Touch Panel will damage the Touch Panel , and potentially cause a
breakage.
- When operating in the Touch Panel , do not press on it using excessive force or with a pointed object
such as a mechanical pencil.
- The Touch Panel may not respond appropriately, if operated with a wet finger.
-
The Touch Panel will not respond appropriately, if operated with hands with gloves on. It is recom-
mended that you use the Stylus Pen supplied with this machine or your finger.
-
The Touch Panel may not respond appropriately, if the distance between you and a fluorescent lamp
is 19-11/16 inches (500 mm) or less while you are operating the Touch Panel .
- Avoid using the Touch Panel at a site near a device that generates electric noise (such as a generator
and an air conditioner). The electric noise may cause the Touch Panel to operate erratically.