Konica Minolta bizhub C258, Быстрый старт

Страница: 104 / 266

bizhub C368/C308/C258 3-27
3.2 Scan-to-Send function 3
Bas
ic Se
tt
in
gs
an
d O
p
e
rat
io
n
s
Ch
a
p
ter 3
3.2.3 Sending data to your Mac computer (SMB Send)
Send scanned data to a computer on the network.
Once settings are configured, you can send data easily.
Preparation flow
The following describes a preparation flow for sending scanned data. For details, refer to the relevant page.
This preparation is not required the second time or subsequent times.
1
Checking the cable connection (Administrator)
% Check that this machine is correctly connected to the network cable. For details, refer to page 3-28.
2
Checking network settings of this machine (Administrator)
%
Check the network settings of this machine. For details, refer to page 3-28.
3
Checking computer information
% Check the information required for Store Address, and fill out the checklist. For details, refer to
page 3-30.
4
Configuring your computer
%
Configure settings to share a computer, or create a dedicated folder to receive files. For details, refer
to page 3-31.
5
Registering destinations
%
Register destinations to which files are sent while checking the checklist. For details, refer to
page 3-33.
Operation flow
The following describes a transmission flow. For details, refer to page 3-35.
1
Loading the original
2
Selecting a destination
% Select a registered destination, and check the settings such as the file type and image quality.
3
Press the Start key.
%
Press the Start key to scan the original.