manualshive.com logo in svg

Konica Minolta bizhub C203 Series, Руководство пользователя

Поделиться
Скачать
Konica Minolta bizhub C203 Series Скачать руководство пользователя страница 243

C353/C253/C203

4-66

Troubleshooting

4

4.9

Simple troubleshooting

Symptom

Possible cause

Remedy

Main 
unit

The machine does not start 
up when the main power 
switch is turned on.

Is no power supplied from the 
electrical outlet?

Correctly insert the power supply 
plug into the electrical outlet.

Has the [Power] (auxiliary power) 
key been turned on?

Turn on the [Power] (auxiliary pow-
er) key.

Copying does not start.

Is the upper right-side door of the 
machine open?

Securely close the upper right-side 
door of the machine.

Is there no paper that matches the 
original?

Load paper of the appropriate size 
into the paper tray.

The printed output is too light.

Is the copy density set too light?

Touch [Dark] in the Density screen 
to copy at the desired copy densi-
ty. (See 

p. 2-53

.)

Is the paper damp?

Replace the paper with new paper. 
(See 

p. 1-41

, 

p. 1-43

 and 

p. 1-45

.)

The printed output is too dark.

Is the copy density set too dark?

Touch [Light] in the Density screen 
to copy at the desired copy densi-
ty. (See 

p. 2-35

.)

Was the original not pressed close 
enough against the original glass?

Position the original so that it is 
pressed closely against the origi-
nal glass. (See 

p. 2-7

.)

The printed output is blurry.

Is the paper damp?

Replace the paper with new paper. 
(See 

p. 1-41

, 

p. 1-43

 and 

p. 1-45

.)

Was the original not pressed close 
enough against the original glass?

Position the original so that it is 
pressed closely against the origi-
nal glass. (See 

p. 2-7

.)

There are dark specks or 
spots throughout the printed 
output.
There are streaks in the print-
ed output.

Is the original glass dirty?

Wipe the glass with a soft, dry 
cloth. (See 

p. 9-2

.)

Is the left partition glass dirty?

Clean the left partition glass with 
the left partition glass cleaner. (See 

p. 9-3

.)

Is the original pad dirty?

Clean the original pad with a soft 
cloth dampened with a mild deter-
gent. (See 

p. 9-4

.)

Was the original printed on highly 
translucent material, such as diazo 
photosensitive paper or OHP 
transparencies?

Place a blank sheet of paper on 
top of the original. (See 

p. 2-7

.)

Is a double-sided original being 
copied?

If a thin double-sided original is 
being copied, the print on the back 
side may be reproduced in the 
copy. Touch [Light] on the Back-
ground Removal screen to select a 
lighter background density. (See 

p. 2-44

.)

Is the electrostatic charger wire 
dirty?

Use the charger-cleaning tool to 
clean the electrostatic charger. 
(See 

p. 9-4

.)

Содержание bizhub C203 Series























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды