Konica Minolta AccurioPress C2060, Быстрое руководство

Страница: 78 / 184

6.1 Both Sides Adjustment 6
AccurioPress C2070series 6-4
2
Making the Both Sides Adjustment for each tray
The following adjustment methods are available.
%
Scan Measurement Adjustment: the method used for adjusting the zoom ratio and printing position
of the back side based on those of the front side to match the appearance of the front and back
sides. Both Sides Adjustment is automatically carried out using the scanner function of this ma-
chine. (page 6-4)
(
Printer model does not support the [Scan Meas.] adjustment.)
% Gap Adjustment: the method used for aligning both sides with correction of the back side magnifi-
cation and print position based on the front side ones (page 6-12).
%
Chart Adjustment: the method used for aligning both sides with correction of the magnification and
print position of both front and back side (page 6-16).
%
Zoom and Image Shift Adjustment: the method used for fine adjustment after Scan Measurement
Adjustment, Gap Adjustment or Chart Adjustment, or the method used when the amount of mis-
alignment between both sides is figured out (page 6-22).
Tips
-
If a rotation or skew is detected on the entire image during printing, you can use [Scan Meas.] adjust-
ment or [Rotate/Skew] to adjust the rotation and skew amount. For details, refer to the [HTML User's
Guide].
- When changing the paper type of the tray or ensuring the accuracy of the print image size (Zoom) and
position (Image Shift), first select [Front] - [Zoom]/[Image Shift] Adjustment or [Chart Adjustment] to ad-
just the front side, then select [Scan Meas.] adjustment or [Back] - [Chart Adjustment] to adjust the back
side.
-
When the reference position on the print side is adjusted or [Both Sides Adjust] is selected, mark is
printed out on the front sides of charts to be printed, and you can identify from which paper tray the
charts are printed out depending on the number of marks. For details, refer to the [HTML User's Guide].
- You can change the default screen of the [Both Sides Adjust] screen. For more information, contact
your service representative. (In
Printer model , you cannot set the [Scan Meas.] adjustment screen to
the default.)
6.1.3 Making the Both Sides Adjustment for each tray
Adjust a misalignment between the front and back sides, which is caused during the duplex printing, for each
tray.
The following methods are available to carry out the Both Sides Adjustment.
-
Scan Measurement Adjustment
- Gap Adjustment
- Chart Adjustment
-
Zoom and Image Shift Adjustment
Tips
-
You can register Both Sides Adjustment values in a paper profile with paper conditions specified. If pa-
per conditions are registered, you can carry out printing under the previous conditions even when you
have changed a tray to load paper into. For information about how to edit or register a paper profile,
refer to the [HTML User's Guide].
Scan Measurement Adjustment
Adjust the magnification ratio and printing position of the back side with reference to the printing position of
the front side. The magnification ratio and printing position of the back side are automatically adjusted by
using the scanner function of this machine to measure the gap amount in printing position of the back side
to the front side. You do not need to measure the gap amount with a scale. The adjustment is available for
paper of all sizes which can be used with this machine.
Print out 1 to 20 sheets of the adjustment chart having both front and back sides printed, and scan them 4
times per sheet. The average value of gap amounts in printing position of the back side to the front side,
which can be obtained by scanning up to 20 sheets of the adjustment chart, will be calculated in order to
adjust the magnification ratio and printing position of the back side.