Konica Minolta AccurioPress C2060, Быстрое руководство

Страница: 60 / 184

5.1 Loading Paper 5
AccurioPress C2070series 5-4
5
Slide the rear guide plate to any position.
% Determine their locations based on the size indicator of
the bottom plate of the tray.
6
To fix the side guide plates at the correct locations, load an appropriate amount of paper into the tray
while aligning it to the right-hand side of the tray.
NOTICE
Load paper with the print side facing down.
7
Press the side guide plate against the paper.
8
Turn two side guide lock knobs (in the front and rear sides)
clockwise, and fix them.
9
Load the remaining paper into the tray, then press the rear
guide plate against the paper.
NOTICE
Do not load more than 500 sheets (80 g/m
2
/ 21 lb Bond) into
Tray 1, and more than 1,000 sheets (80 g/m
2
/ 21 lb Bond)
into Tray 2. Also, do not load paper above the
,
mark that
indicates the height limit on the side guide plate . Other-
wise, a paper jam may occur.
Be sure that the rear guide plate is securely pressed
against the paper. If there is any gap between the rear guide
plate and the paper, this machine will not be able to detect
the correct paper size. It may cause a paper feeder machine
error.
Check paper for kinks. Otherwise, a paper jam may occur.
10
Close the tray.
% Push the tray in until it locks into place.
The amount indicator changes from to in the tray information display area of the [MA-
CHINE] or [COPY] screen.
NOTICE
Carefully close the tray. Otherwise, the machine may be subjected to an unexpected impact due to the
tray or paper weight, which may lead to a machine error.