Konica Minolta AccurioPress C2060, Быстрое руководство

Страница: 102 / 184

6.2 Image Quality Adjustment 6
AccurioPress C2070series 6-28
Calibration timing
Adjust the daily color image quality at the times and in the order shown below. The adjustment method varies
depending on whether or not the
Relay Unit RU-509 is installed on the machine.
Daily adjustment flow (Standard)
This adjustment is required for all customers in daily operations. Carry out adjustments at the following times:
- Six (6) hours after turning this machine on
-
When 1,000 or 2,000 sheets have been printed out
-
Immediately before an image, in which the hue is important, is output
- Otherwise, when you think the hue is not correct
Daily adjustment flow (High)
In addition to "Daily adjustment flow (Standard)", carry out adjustments in the following cases, in particular:
- Immediately before an image, in which the hue is important, is output
-
When the color stability is insufficient (when enhancing the reproducibility)
- When the paper type is different
Order [Menu item] [Description]
Without Relay
Unit RU-509 With Relay Unit
RU-509
STEP1 Calibration
(page 6-37) [Color Density Con-
trol] (page 6-32) Calibration:
Calibrates the color reproducibility that fluctu-
ates from day to day.
[Color Density Control]:
Select [Basic Setting], then set [Periodical Adj.
Execution] to [ON]. If necessary, execute
[Color Density Manual Control].
Order [Menu item] [Description]
Without Relay
Unit RU-509 With Relay Unit
RU-509
STEP1 [Gamma Automat-
ic Adj.]
(Refer to the
[HTML User's
Guide].) [Color Density Con-
trol]
(Refer to the right-
hand section.) [Gamma Automatic Adj.]:
Automatically adjusts the color reproducibility
of all the output paper.
[Color Density Control]:
•
Check that [Periodical Adj. Execution] is
set to [ON] in [Color Density Control] - [Ba-
sic Setting].
• Also, check the setting of [Color Density]
for the tray to be used. To check the set-
ting status, press [Paper Setting] on the
[MACHINE] screen, select the tray to be
specified, then select [Changer Set] -
[Color Density].
To use standard paper, set [Default Adj.
Data].
When you use special paper or you want
to enhance the accuracy of auto adjust-
ment, we recommend that you set [Each
Paper Type Color Adj.]. For details, refer to
the [HTML User's Guide].
STEP2 [Maximum Density
Adjustment]
(Refer to the
[HTML User's
Guide].) [Gamma Automatic
Adj.]
(Refer to the [HTML
User's Guide].) [Maximum Density Adjustment]:
Enhances the density reproducibility.
[Gamma Automatic Adj.]:
Automatically adjusts the color reproducibility
of all the output paper.