Konica Minolta 7145, Инструкция по эксплуатации

Страница: 275 / 359

[2] Copier Initial (continued)
13-13
To select the desired staple location, touch STAPLE SET . Touch the desired location on
the Staple Location Initial Setting popup menu, and touch OK .
To select the desired punch position, touch PUNCH SET under the STAPLE SET key.
Touch the desired punch position on the Punch Position Initial Setting popup menu, and
touch
OK .
If desired, touch SORT , GROUP , or STAPLE to use one of these modes along with the
Punch mode.
4 For the machine with FS-114 Finisher, perform the following operation and proceed to
step
7 .
To select the exit tray, touch the desired tray key in the EXIT area.
NOTE:
Select Saddle Tray to specify the Fold or Fold&Stitch mode.
To select the Output mode, touch SORT or GROUP .
To use the Staple mode, touch STAPLE .
NOTES:
1. If STAPLE is selected, SORT is automatically highlighted.
2. If selecting Stack mode, do not highlight any of the SORT , GROUP , or
STAPLE .
To select the desired staple location, touch STAPLE SET . Touch the desired location on
the Staple Location Initial Setting popup menu, and touch OK .
If the Finisher is mounted with SK-114 Saddle kit, the Fold or Fold&Stitch mode is also
available. To use these modes, touch
FOLD or FOLD&STITCH .
If the Finisher is mounted with PK-114 Punch kit, the Punch mode is also available. To
use the Punch mode, touch
PUNCH .
To select the desired punch position, touch PUNCH SET under the STAPLE SET key.
Touch the desired punch position on the Punch Position Initial Setting popup menu, and
touch
OK .
If desired, touch SORT , GROUP , or STAPLE to use one of these modes along with the
Punch mode.
5 For the machine with IT-101 Inner tray, perform the following operation and proceed to
step
7 .
To select the exit tray, touch TRAY 1 or TRAY 2 .
To select the Output mode, touch GROUP , E-SORT+Sort , or E-SORT+Group .
6 For the machine without Finisher, perform the following operation and proceed to step 7 .
To select the Output mode, touch GROUP , E-SORT+Sort , or E-SORT+Group .
7 Touch OK to complete the setting and return to the Copier Initial Setting Menu Screen. If
other copier initial setting changes are required, touch the desired key.
8 Touch RETURN to restore the System/Copier Setting Menu Screen.
9 If no further changes are required, turn the machine power OFF then ON for normal
copying operations.
13
Key Operator
Mode
KRDS Host
Density Shift
Application
Customize
List Print
Memory
Switch
Power Save
Touch Panel
Adjustment
Weekly
Timer
Key Operator
Setting
Panel Contrast
Paper Type
Lock Job
Memory
User
Account
Preset Key
Copier Initial
System Initial
Key Operator
Mode
HDD Setting
Menu
Finisher
Adjustment
Machine Mail
Address