Konica Minolta 7145, Инструкция по эксплуатации

Страница: 202 / 359

Repeating Automatically or Selecting Repeating Times (Repeat:
AUTO/ Repeat Mode) (continued)
9-36
6.
Select the desired magnification and paper size.
• APS and AMS are automatically released, and 1.00 (100%) is selected
as a magnification ratio.
• When RepeatX2, RepeatX4, or RepeatX8 is selected, the scanning area
will be a portion of the selected paper size equally divided according to
the selected mode.
In this case, magnification ratio will be fixed to 1.00 (100%).
• Copy mode is automatically set to 1-1. When selecting 1-2 mode, Platen
store mode will function automatically.
7.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
8.
Position original.
For AUTO mode original, open the document feeder, then position the original FACE
DOWN on the platen glass.
For RepeatX2, RepeatX4 or RepeatX8 mode original, RADF is also available.
See the illustration on p. 9-34 for details.
W hen A UTO mode i s sel ected, Non-Imag e Area Erase fu nctio ns
automatically.
DO NOT close the document feeder.
9.
Press [ START ].
When the finisher / paper exit / inner tray capacity is exceeded due
to the print quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.
The AUTO mode may not operate properly if the lighting in the work place is
di rectl y over the pl aten gl ass. In thi s case , consu lt your s ervi ce
representative about an appropriate place for installation.