Kongskilde VIBRO TILL 2900 Series, Инструкция по сборке

Страница: 7 / 44

7
When the tines are mounted to the main frame and front extension, move the 2 frame sections together
and assemble the centre section with the bolts, nuts, washers and pins shown in the parts list.
Take care to insert the front frame bolts from the front and insert the back frame bolts from the back
so that the locknuts are all facing inside the machine. This will keep the frame assembly looking neat
and tidy and make the assembly more efficient.
(Note: The assembly diagrams do not show tines installed for easier viewing. In special situations
where the machine must be partly assembled and shipped to another location, the tines may be mounted
after assembly. But generally you will find it easier to mount the tines as you assemble each frame
section.)
Example:
10' (3m) Centre & Front Frame Assemby
Hardware Organization
Carefully unpack and lay out all of the fasteners and hardware. (The empty shipping crate and cardboard
makes an excellent temporary work bench.) Assembling the cultivator is more efficient if you take a
few minutes to sort and organize the hardware by type and size instead of dumping the bag or box in a
pile on the floor. Place the assembly instructions and parts list on the table for quick reference to help
identify the parts for each step of the assembly.
Reinforcement plates to bottom