Kongskilde VIBRO TILL 2900 Series, Инструкция по сборке

Страница: 30 / 44

30
Mechanical Adjust Wheels on 3'3" (1.0m) Wings:
The mechanical adjusting wheel is used as the wing depth wheel on the 16' (5m) model cultivator with
1m wings. It is also available as an accessory wing gauge wheel on all other models.
On the small 3'3" (1.0m) Wing, the wheel is mounted inside the wing frame to the toolbar as shown
below. It should be assembled with the wheel mounted to the outside and positioned to run about 1-1/2
to 2" away from the outside of the wing.
The mounting bracket and wheel arm are designed to allow the wheel to be assembled for right or left
hand use by turning the wheel arm over and mounting the turnbuckle adjuster on the opposite side of
the mounting bracket. The diagram below shows the wheel assembled for the right side wing.
Adjustment of the working depth of the wing is accomplished using the mechanical ratchet on the
turnbuckle. An extension handle is provided for easier adjustment of the mechanical ratchet.