Kongskilde CM 305 F, Руководство оператора

Страница: 52 / 58

6. MISCELLANEOUS
PIGB 097A 05 CM 305F 0218
52
STORAGE
When the season is over, the preparation for winter storage should be made. First,
clean the machine thoroughly as dust and dirt absorb moisture and moisture
increases the formation of rust.
CAUTION: Be careful when cleaning with a high pressure cleaner. Never clean
rotating parts with a high pressure cleaner and never spray directly
on bearings.
IMPORTANT: Grease all grease points after cleaning the machine.
The following points are instructions how to prepare for winter storage.
- Check the machine for wear and other defects.
Note down the wearing parts needed before the next season and order the
spare parts.
- Dismount, clean and lubricate the PTO shafts. Remember to grease the profile
tubes. The PTO shaft must be kept in a dry place.
- Spray the machine with a thin coat of rust-preventing oil. This is especially
important on the parts polished with use.
- Store the machine in a ventilated engine house.
SPARE PARTS ORDER
When ordering spare parts, please state machine type and serial number.
This information is printed on the machine plate which is placed as shown on the
figure below.
We request you to write this information on the first page in the spare parts book
supplied with the machine as soon as possible so that you have the information at
hand when ordering spare parts.