Kongskilde CM 305 F, Руководство оператора

Страница: 36 / 58

3. ADJUSTMENTS AND DRIVING
PIGB 097A 05 CM 305F 0218
36
Fig. 3.10 The purpose of the pawl lock is to prevent unintentional access to the drums as this
may cause serious injury.
CUTTING ANGLE
The cutting angle must always be 0° (horizontal).
N.B. Do not let the machine incline backwards as this would result in recutting of the
material and the stubble.
ADJUSTMENT OF THE CUTTING HEIGHT
A higher cutting height can be obtained by mounting additional spacers between hub
and guide shoes.
CONTINUOUS ADJUSTMENT OF CUTTING HEIGHT (ACCESSORY)
Fig. 3.11 Block the hub with the tool 2. Turn the guide shoe 3 to adjust the cutting height.
After every half turn, corresponding to 2 mm, the hub falls into the notch.
The hub must be in the notch when the adjustment is finished.
Adjust all 4 guide shoes to the same height.
P
R
1
1
-1
6
3
3
Fig. 3.10
P
R
1
1
-1
7
0
0
Fig. 3.11