2. CONNECTION OR DISCONNECTION AND TEST DRIVING
PIGB 097A 05 CM 305F 0218
28
TEST DRIVING
CHECK BEFORE TEST DRIVING
Before test driving, the following should be checked:
1) That the PTO shaft of the tractor has the correct number of RPM.
2) That all lubricating points have been greased. See section 4; GREASING.
3) That all blades on the drums are intact and correctly mounted.
4) That the springs of the swath discs have been tightened sufficiently to ensure that
the discs do not get in contact with the front wheels of the tractor.
5) That the swath discs have minimum 10 mm safety distance to rotor skirts and
drums in all positions.
6) That the cutting unit rests on the ground when connecting the PTO shaft of the
tractor.
7) That connection of the PTO shaft of the tractor is carried out with a low number of
RPM on the engine.
8) That the PTO shaft between the PTO of the tractor and the PIC of the centre
gearbox is not squeezed, or bottomed, when the link arms of the tractor are
raised and lowered carefully.
9) That the safety guards of the PTO shafts do not rotate with the shafts, that the
support chains are fastened correctly.
10) That the protection (guards and canvases) on the machine are complete, intact
and correctly mounted.
11) That all tools have been removed from the machine.
12) That nobody stands near the machine during operation.
13) That the front hydraulics has been lowered and placed in floating position.
Содержание CM 305 F
Страница 2: ......
Страница 16: ...1 INTRODUCTION PIGB 097A 05 CM 305F 0218 16...
Страница 18: ...1 INTRODUCTION PIGB 097A 05 CM 305F 0218 18 PR11 1619 2999 1400 4185...
Страница 57: ......