26
The wing fold cylinders must be charged
with oil before attempting to fold the
cultivator. Disconnect the cylinder rod
clevis from the fold bracket and place a
block under the cylinders as shown.
Connect the hoses to the tractor or
portable hydraulic unit and stroke the
wing fold cylinders in and out several
times holding the lever at the end of the
stroke to remove the air from the system
and ensure the cylinders and hoses are full
of oil. Remove the block and reconnect
the cylinder to the fold bracket with the
cylinder pin, washer and clip pin.
Always insert the transport lock on the
master cylinder when ever the cultivator is
placed in the raised position for transport,
maintenance or storage.
Secure with the lock pin and clip
provided.
Always make sure the wing fold
lock latches are in the correct
postion when wings are raised in the folded
position. Be sure to unlatch the lock latch
before unfolding the cultivator.
Further notes on Hydraulics Installation
