25
Hydraulic Assembly Information:
For proper installation of the hose lines and fittings refer to the hose layout diagram provided in this
booklet. The hydraulic hose lines and fittings are provided in the hose kit. Secure the hoses to the frames
with the hose clamps, carriage bolts and locknuts provided.
IMPORTANT NOTE:
DO NOT PLACE HOSE LINES ALONG FRAME IN FRONT OF TOP FRAME MOUNTING PLATES
AS SHOWN BELOW. Hose lines can become pinched by the front wing fold stop plate when folding
the machine if the hoses are laying on top of the frame tube.
Also improperly attached hoses can compromise the hydrualic system. This could damage the equipment
and should be avoided. Check the hydrualic attachments before using the machine.
The cylinders used are designed to rephase. Raising and lower the machine to its maximum extent with
make all of the cylinders act in phase.
THIS IS RIGHT! KEEP HOSE LINES RUNNING ACROSS THE
CULTIVATOR BEHIND THE FRAME TUBE AND NEATLY CLAMPED
TO THE FRAMES WITH THE HOSE CLAMPS OR PLASTIC TIE
STRAPS PROVIDED.
