Kongsberg SIMRAD 11252236, Руководство пользователя

Страница: 17 / 32

Instruction Manual
17
E04818 Issue 1.0
5 INSTALLATION
5.1 Fitting the Tillerpilot
The Tillerpilot is a very sophisticated piece of equipment and,
therefore, in order for it to function to its full capabilities, it is
essential that it is installed correctly.
Please read this section
thoroughly before attempting installation and use.
The Tillerpilot should be horizontally level when fitted to the
tiller (Fig 5.1).
595mm (23.5in) Pushrod at mid-stroke
Horizontal
38mm
With the tiller amidships and the pushrod in the midstroke posi-
tion, the Tillerpilot should be exactly 90
º to the tiller (Fig 5.2).
Fig 5.1 - Installation, cross section
NAV STBY TACK STBY AUTO
460mm (18in)
90º
Fig 5.2 - Installation, plan view
Note The pilot is factory preset to be mounted on the Starboard side
as shown, but this can be reconfigured for Port-side mounting
(see section 4.1).
The dimensions given in Figures 5.1 and 5.2 should be adhered
to as closely as possible, especially Fig 5.1. Some tolerance on
the distance from the tillerstock (Fig 5.2) is permissible, but the
Tillerpilot may require a Gain adjustment to compensate.