Kongsberg SIMRAD 11252236, Руководство пользователя, Страница: 14 / 32

With the power off, hold down the NAV ( CAL ) and TACK
keys and switch on the power. The Port or Starboard LED will
illuminate, depending on the current mounting configuration.
Press the
Port ( ) key to select Port-side mounting – the Port
LED will illuminate to indicate selection. Confirm selection
and exit to Standby mode by pressing
NAV ( CAL ) (Fig 4.2).
To select Starboard mounting, repeat the above procedure, but
press the
Starboard ( ) key.
4.2 Calibration mode
The Gain and Seastate settings can be adjusted while the Tiller-
pilot is in either Standby or Autopilot mode:
• Press and hold the TACK key, then press NAV ( CAL ) (Fig
4.3).
• The Starboard LED will illuminate to indicate that Gain
adjustment is selected. To toggle between Gain and Seastate
adjustment, press
TACK – the Port LED will illuminate for
Seastate.
STBY
NAV
TACK
STBY
AUTO
Fig 4.3 - Entering
Calibration mode
Tillerpilots TP10/TP22/TP32
14
E04586 Issue 2.0
Fig 4.2 - Configuring
for Porthand mounting
POWER
4 CONFIGURATION
4.1 Porthand mounting
Although the Tillerpilot is factory preset for Starboard-side
mounting, it is possible to reconfigure it for mounting on the
Port-side of the cockpit to facilitate easy installation on most
types of yacht (Fig 4.1).
NAV STBY TACK STBY AUTO
Fig 4.1 - Starboard and Port mounting options
TACK
NAV
STBY
NAV
TACK
STBY
AUTO
TACK
NAV
TACK
STBY
NAV
TACK
STBY
AUTO
NAV
ON