Kongsberg Seapath 320, Руководство по установке, Страница: 90 / 152

Seapath 320
74 M300-62/rev.2
The main purpose of the output telegram function is to enable the configuration of data
messages transmitted to external equipment. Up to 16 serial/network interfaces may be
set up.
Monitoring point Select among the list of monitoring point and click on the MP
the measurements are to be output in.
Format The format of the output telegrams. Select among the list of
output formats.
Interval Seconds between messages being output.
Options From the Options drop down list, specific telegram outputs are
set. The options are as described in Figure 52.
Figure 52 Telegram output options
The telegram options are:
Output residuals on Ashtech RRE format (GRS)
Send VHW message after VTG using ground speed from VTG
Output empty fields in HDT message even when accuracy is reduced
Use inertial roll, pitch and heave only
Use UTC time in ZDA message
Disable additional GNS messages when diffcorr is used for both GPS and
GLONASS
Limit correction age to 9.9 seconds in GGA
Use GNSS solution only
Set GGA quality indicator to 5 if converged HP, XP or G2