Kongsberg Seapath 320, Руководство по установке, Страница: 54 / 152

Seapath 320
38 M300-62/rev.2
3 Insert the MRU into the bracket. In order to achieve the orientation as shown in
Figure 12, the MRU must be rotated in the bracket. Apply Loctite 242 glue or
equivalent on the four MRU screws (3).
Note
The MRU R+ arrow must always point in the bow direction unless the
default mounting orientation of the unit is modified in the MRU
configuration
4 Apply the sticker (4) onto the bracket according to the actual mounting direction
of the MRU, as shown in Figure 14. In this way, the actual mounting direction is
identified in case the unit is to be exchanged or removed temporarily.
Figure 14 Sticker (4) shall indicate actual MRU mounting orientation within bracket
Note
If the MRU is mounted correctly in the bracket, the +R arrow on the top of
the MRU will point in the bow direction of the ship and the same direction
as the R-axis of the sticker. If uncertain whether the MRU R-axis is
pointing in the bow direction, look under the MRU and check that the +R
arrow label is pointing in the bow direction. Precise MRU orientation is
important to ensure that high quality and accurate measurements are
available to the host system
5 Mount the junction box on the wall in a suitable location within the length of the
3-metre MRU-E-CS1 cable, as shown in Figure 15 MRU junction box mounting