manualshive.com logo in svg

Kongsberg Seapath 320, Руководство по установке, Страница: 17 / 152

Поделиться
Скачать
Kongsberg Seapath 320 Скачать руководство пользователя страница 17

Installation Manual 

 

M300-62/rev.2 

 

1 

1

 

PRODUCT DESCRIPTION 

This manual describes a typical survey installation of the Seapath 320 system on a 
vessel. For all other information about the Seapath, please consult the 

User Manual

, 

reference [1]. 

1.1

 

Purpose and application 

Seapath 320 combines the latest achievements in advanced GPS and GLONASS 
technology aided by a high performance IMU (Inertial Measurement Unit). The 
integration of GPS/GLONASS and an IMU is ideal due to the combination of 
complementary physical qualities into a tightly integrated solution. 

1.2

 

System components 

The system is supplied with the following parts: 

 

Seapath 320 Processing Unit including processing software. Part no. M300-23. 

 

Antenna Bracket in aluminium, 2.5-metre baseline. Part no. M320-21. 

 

Antennas, two GPS/GLONASS L1&L2 antennas. Part no. G060-24N. 

 

Cable, Interconnection, N-M/N-F, four of 1 m. Part no. G071-91. Two as adapter 
cable from GNSS antenna connector to cable and two as adapter cable for GNSS 
antenna cable to PU (N to N). 

 

Seapath HMI Unit with operator software. Part no. M300-04. 

 

Cable for power, Processing and HMI Unit, two of 2.5 m. Part no. G032-28. 

 

Monitor, 17" standard LCD, table mount. Part no. G060-32. 

 

Keyboard (US layout). Part no. G062-11. 

 

PC mouse. Part no. G062-16. 

 

MRU 5 sensor. Part no. MRU-5. 

 

MRU wall mounting bracket. Part no. MRU-M-MB3. 

 

MRU junction box for flexible connection of MRU to Seapath. Part no. MRU-E-JB1. 

 

Cable, heavy duty screened cable with 14 twisted pairs. Part no. MRU-E-CS1. 

 

MRU transportation box. Part no. MRU-M-SC1. 

 

Seapath 320 Product Manuals. Part no. M300-72. 

 

Содержание Seapath 320

























































































































































Отзывы:

Нет отзывов