
page 33
18. Installation
Front mounting instructions. Most units will be mounted onto a bulkhead, dashboard or panel - a
method described below; the components required (4 x M4 studs and thumbnuts) are supplied
with every Engine Monitor.
Instructions:
• Decide on a location.
• Allow adequate clearance behind the display for cable connections, to ensure that the cables
are not unduly stressed, and for ventilation. Leave sufficient cable so that the unit may be
removed for servicing.
• Using the template supplied with the display as a guide, cut out the mounting hole, and drill four
ø4.3mm (0.170inch) holes for the M4 studs.
• Screw the studs into the rear case; longer studs can be used (not supplied).
• Connect the cable (not supplied).
• Place the Engine Monitor in position, secure by screwing thumbnuts onto the studs.