Kongsberg EM 2040C, Руководство по обслуживанию

Страница: 99 / 124

378511/A
97
4 Assuming all is well, open the bag and remove the unit.
5 If applicable, open the unit and check inside.
6 Remove any packing and desiccant material that may be inside the unit.
7 Collect and keep the relevant user manuals and/or documents provided with the unit.
Related topics
Unpacking standard parts and units, page 94
Unpacking transducers
Prior to installation or use, sonar heads and hydrophones must be unpacked from their
transport boxes. It is important that this unpacking is done without inflicting damage
to the equipment.
Prerequisites
Observe the procedure for unpacking of standard parts and units.
Context
Transducers may be supplied mounted to a hull unit (if any), or packed separately. Sonar
heads and hydrophones are normally packed and shipped in separate boxes. Boxes are
identified by the order number and the serial number of the unit inside.
Note
Once a transducer, sonar head or hydrophone is unpacked, make sure that the body and
the cabling are not exposed to any mechanical stress. Protect the transducer face with a
padded cover plate to prevent damage.
Transducers may be heavy.
A sonar head must always be handled as a delicate item. Wrongful actions may damage
the sonar head beyond repair.
Observe these sonar head handling rules:
• Do not activate the sonar head when it is out of the water.
• Do not lift the sonar head by the cable.
•
Do not
step on the sonar head cable.
• Do not handle the sonar head roughly, avoid impacts.
• Do not expose the sonar head to direct sunlight or excessive heat.
•
Do not
use high pressure water, sand blasting, metal tools or strong solvents to clean
the sonar head face.
Equipment handling