Konfor SPS-916W, Инструкция по эксплуатации

Страница: 38 / 47

38
Figure 5.3
3. Before moving the humidifier, remove the
tank from the base and empty any excess
water from the inner chamber. [ Figure 5.3 ]
4. Wipe off any excess water on the top and
bottom of the base.
5. Do not shake the humidifier or place it on
an inclined surface. Make sure to place the
humidifier on a flat, level surface. [ Figure 5.4 ]
CAUTION:
• Always make sure the humidifier is
unplugged from any power source when
cleaning.
• The water in the inner chamber near the
transducer may still be warm after turning
off the humidifier. Use caution when pouring
out the water.
P R E V E N T I N G
WAT E R L E A K S
(cont.)
K E E P I N G T H I N G S
C L E A N
Figure 5.4
1. Unplug the humidifier.
2. Remove the nozzle from the water tank.
Rinse the nozzle and the cover under clean,
running water. Set it aside to air dry.
3. Unlock the water tank, remove it from the
base, and pour out any excess water in the
inner chamber. Fill the tank with 2 cups of
distilled white vinegar and 2 cups of water.
Replace the cap and gently shake to coat all
sides of the water tank.
4. Fill the inner chamber with 1 cup of distilled
vinegar.
5. Allow the vinegar to soak inside both the
water tank and inner chamber for 30 minutes.
General Cleaning