10
8.
Turn the safety lock to the position.
[
Figure 1.8
]
9.
Replace the nozzle. [
Figure 1.9
]
Figure 1.8
NOTE:
Wipe off any excess water on the top and
bottom of the base before replacing the water
tank.
Figure 1.9
O P E R AT I O N
General Operation
1.
Place the humidifier on level, elevated surfaces,
such as tables or nightstands. Make sure the
room is well-ventilated.
2.
Plug in the humidifier. The display icons will light
up and turn off.
3.
Tap once to turn on the humidifier. [
Figure 2.1
]
The humidifier will start misting.
a.
If there is no water in the tank, will light
up. Unplug the humidifier and refill the water
tank. See
Getting Started
(page 8).
b.
If the last humidity setting is lower than the
humidity level of the environment, it will
release mist for a few seconds and then
stop misting.
3.
(
Optional
) Press the mist level controls to change
the mist level. [
Figure 2.2
]
4.
Press to turn off the humidifier.
G E T T I N G S TA RT E D
( c o n t . )
NOTE:
Position the humidifier at least 10 inches
(25 cm) away from walls, and direct the nozzles
so that the produced mist is at least 40 inches
(102 cm) away from walls.
Figure 2.1
Figure 2.2
ON / OFF
DISPLAYA
RM
LIGHT
W
ON / OFF
ISPLAY
WARM
LIGHTH
UMIDITY
IMER
D
T
Содержание SPS-916W
