Konfor SPS-916W, Инструкция по эксплуатации

Страница: 14 / 47

14
O P E R AT I O N ( c o n t . )
You can choose between mist levels 1 through 5.
You can also use the + and - buttons to change
the mist level.
Humidity Sensor
The humidity sensor on the power cord is a
vital component to this appliance. Please note
the following tips to ensure that the sensor is
functioning properly.
Automatic Shut Off
1. The humidifier will automatically turn off and
the will appear when all of the water in
the tank has been diffused. The display will
continue showing the until more water is
added to the water tank. [ Figure 3.1 ]
You can set a timer between 1 and
12 hours.
a. Tap TIMER repeatedly or press
and hold to choose a time.
b. When you stop pressing
TIMER , the display will flash 3
times and the timer will start.
c. Tap TIMER repeatedly or press
and hold until it shows “-- --”
to exit the timer function. The
humidifier will automatically
power off once the timer is
finished.
TIMER
• Do not pull on the humidity sensor or the
cord.
• Do not point the nozzle toward the humidity
sensor.
• Do not allow excessive moisture to build up
inside the sensor. This will result in incorrect
relative humidity readings.
• If there is moisture inside the humidity
sensor, turn off the humidifier and allow
the sensor to completely air dry before
resuming use.
• Do not use hot air to dry the sensor. Doing
so will cause it to malfunction.
ON / OFF DISPLAYW ARML IGHT HUMID ITYT IMER
Figure 3.1