Konfor SPS-916W, Инструкция по эксплуатации

Страница: 13 / 47

13
O P E R AT I O N ( c o n t . )
You can set the humidity level
between 30% and 80%.
a. Tap HUMIDITY to turn Auto
Mode on and off.
b. To change the humidity level,
press and hold HUMIDITY until
the humidity percentage on the
display starts blinking.
1. Press the
+
button
repeatedly to increase
humidity. Once it reaches
80%, pressing
+
again
will revert humidity to the
lowest percentage (30%).
Tap to turn warm mist on and off.
CAUTION: The warm mist being
produced is 104°F (40°C). Do not
place your bare hands, face, or
other exposed skin over the nozzle
while using the warm mist function.
WARM
NOTE:
• The warm mist function will
remain off if the humidifier is not
producing mist.
• Allow 15 minutes for the humidifier
to warm up before producing
warm mist.
HUMIDITY
2. Press the
-
button
repeatedly to decrease
humidity. Once it
reaches 30%, pressing
-
again will revert
humidity to the highest
percentage (80%).
c. Once the humidity level of
the environment reaches the
set humidity level, the mist
will automatically stop.
d. To cancel the current
humidity function, tap
HUMIDITY repeatedly until
“Co” appears on the display,
or press and hold HUMIDITY
for 2 seconds. The humidifier
will enter Auto Mode after
cancellation.